A NiZn ferrite developed to combine a high suppression performance, from 30 MHz to 500 MHz, with a very high DC resistivity.

Dim mm mm tol nominal inch inch misc.
A 23.7 _ 0.933 _
B 10.15 _ 0.4 _
C 39.4 _ 1.55 _
D 11.7 _ 0.46 _
44 ROUND CABLE CORE ASSEMBLY
Broadband Frequencies 25-300 MHz (43 & 44 materials)
Suppression Components
Cable Component
Printer Friendly Data Sheet
Check Stock
Basic Electrical Mechanical Material
A NiZn ferrite developed to combine a high suppression performance, from 30 MHz to 500 MHz, with a very high DC resistivity.
Available in 44 material:
SM Beads
PC Beads
Wound Beads
Round Cable Snap-Its
Connector EMI Suppression Plates
44 Material Characteristics
Property Unit Symbol Value
Initial Permeability@ B < 10 gauss µi 500
Flux Density @ Field Strength Gauss
Oersted B
H 3000
10
Residual Flux Density Gauss Br 1100
Coercive Force Oersted Hc 0.45
Loss Factor @ Frequency 10 -6
MHz Tan δ/ µi 150
1.0
Temperature Coefficient of Initial Permeability (20 -70°C) % / °C 1.6
Curie Temperature °C Tc >160
Resistivity ohm-cm ρ 1×109
**** Characteristic curves are measured on standard Toroids (18/10/6 mm) at 25°C and 10 kHz unless otherwise indicated. Impedance characteristics are measured on standard shield beads (3.5/1.3/6.0 mm) unless otherwise indicated.
Ferrite Material Constants
Specific Heat0.25 cal/g/°CThermal Conductivity3.5 - 4.5 mW/cm-°CCoefficient of Linear Expansion8 - 10x10-6/°CTensile Strength4.9 kgf/mm2Compressive Strength42 kgf/mm2Young's Modulus15x103 kgf/mm2Hardness (Knoop)650Specific Gravity≈4.7 g/cm3
The above quoted properties are typical for Fair-Rite MnZn and NiZn ferrites.l
Ferriet klem 10,15 mm, #44 Materiaal
- Brand: Fair-rite
- Product Code: Ferriet klem 10,15 mm, #44 Materiaal
- Availability: 5
-
€2.40
- Ex Tax: €1.98
Tags: Ferriet klem 10, 15 mm, #44 Materiaal